dash–calculator

04 Numbers and Counting

Complex Root bl4 Location?

Readout 04-0270 · Updated · Standard formula, shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

The “complex root bl4 location” refers to the fourth root (bl4 = branch level 4) of a complex number, which you find by applying De Moivre’s formula to the polar form of the number. To locate it, you convert the complex number to polar coordinates (r, θ), then the fourth roots are points at radius r^(1/4) and angles (θ + 2πk)/4 for k = 0, 1, 2, 3. Each root is a distinct point in the complex plane, spaced 90° apart on a circle centered at the origin.

Formula

For a complex number z = a + bi, its n-th roots are given by:

z_k = r^(1/n) * [cos((θ + 2πk)/n) + i * sin((θ + 2πk)/n)]

where:

  • r = √(a² + b²) is the modulus (distance from origin)
  • θ = atan2(b, a) is the argument (angle from positive real axis, in radians)
  • n is the root index (4 for fourth root)
  • k = 0, 1, 2, …, n-1 enumerates the distinct roots

All angles are in radians for the formula; the calculator uses degrees for display but converts internally. The atan2 function returns the angle in the correct quadrant, from -π to π.

Worked Example

Using the default values a = 3, b = 4, n = 4:

  1. Compute r = √(3² + 4²) = √(9 + 16) = √25 = 5
  2. Compute θ = atan2(4, 3) ≈ 53.13° = 0.9273 rad
  3. Root radius = 5^(1/4) ≈ 1.4953
  4. For k=0: angle = (0.9273 + 0)/4 = 0.2318 rad → root ≈ 1.4953*(cos(0.2318) + i*sin(0.2318)) ≈ 1.455 + 0.344i
  5. For k=1: angle = (0.9273 + 2π)/4 = 1.8024 rad → root ≈ 1.4953*(cos(1.8024) + i*sin(1.8024)) ≈ -0.344 + 1.455i
  6. For k=2: angle = (0.9273 + 4π)/4 = 3.3730 rad → root ≈ -1.455 – 0.344i
  7. For k=3: angle = (0.9273 + 6π)/4 = 4.9436 rad → root ≈ 0.344 – 1.455i

These four points lie on a circle of radius 1.4953 centered at the origin, spaced 90° apart. The calculator outputs match these values.

Why the Fourth Root Has Four Locations

The fundamental theorem of algebra states that every non-zero polynomial of degree n has exactly n complex roots. The equation z⁴ = w has degree 4, so it has exactly four solutions. Geometrically, multiplying complex numbers adds their angles and multiplies their magnitudes. To undo a fourth power, you divide the angle by 4, but because angles wrap around every 2π, you must add multiples of 2π before dividing. That gives four distinct angles: (θ + 0)/4, (θ + 2π)/4, (θ + 4π)/4, and (θ + 6π)/4. Adding 8π would bring you back to the first angle, so there are exactly four.

This is why the fourth root of a positive real number like 16 has two real roots (±2) and two imaginary roots (±2i). The calculator with a=16, b=0, n=4 will show those four points.

How to Read the Results

The calculator outputs the radius of all roots and the coordinates of each root for k=0 through k=3. The first output (r) is the distance from the origin to each root. The second (th) is the original angle θ in degrees. Then rroot is the common radius of all roots. The next eight outputs are the real and imaginary parts of each root.

When you plot these on the complex plane, you get a square (for n=4) inscribed in a circle. The vertices are the roots. If the original complex number lies on the real axis (b=0), the roots will be symmetric about that axis. If it lies on the imaginary axis, the roots will be rotated accordingly.

For practical use, you only need the root with k=0 if you want the “principal” fourth root (the one with the smallest positive angle). The other three are equally valid mathematically; they are just different solutions to the same equation.

Common Mistakes and Misconceptions

  • Forgetting the 2πk term: Many people compute only the k=0 root. That gives one root, not all four. Always include the full cycle.
  • Using degrees in the formula: The trigonometric functions in the formula expect radians. If you use degrees directly, you get wrong results. Convert degrees to radians by multiplying by π/180.
  • Confusing the root index with the exponent: The fourth root of z is z^(1/4), not z^4. The notation bl4 might be mistaken for a power, but it means the fourth root.
  • Ignoring the quadrant: When computing θ, use atan2(b,a) rather than atan(b/a) because the latter gives the wrong angle for numbers in the second or third quadrant. For example, -3+4i has θ ≈ 126.87°, not -53.13°.
  • Rounding too early: If you round the angle to two decimals before dividing by 4, the root coordinates can be off in the second decimal place. Keep full precision until the final step.

Applications of Complex Roots

Complex roots appear in many fields. In electrical engineering, they describe the steady-state response of circuits to sinusoidal inputs. In control theory, the roots of a characteristic polynomial determine system stability. In signal processing, the roots of a polynomial are used in filter design. In physics, complex roots arise in wave equations and quantum mechanics. The fourth root specifically appears in quartic equations, which model certain mechanical vibrations and optical systems.

In computer graphics, complex numbers are used to rotate and scale points. The fourth root of a transformation matrix can be used to animate a smooth transition between states. In cryptography, some algorithms rely on the difficulty of computing roots modulo a prime, but the complex-plane version is easier to visualize.

How to Choose the Right Root for Your Problem

If you are solving an equation like z⁴ = w, you need all four roots. If you are computing a physical quantity that must be real and positive (like a distance), you might only use the root with positive real and imaginary parts, but check the context. In many engineering problems, the principal root (k=0) is the one with the smallest angle, but sometimes the convention is to use the root with the largest real part.

For example, if you are finding the fourth root of a negative real number like -16, the principal root is 2·(cos(45°)+i·sin(45°)) = √2 + i√2, which is in the first quadrant. The other roots are in the second, third, and fourth quadrants. If your application requires a real result, none of the roots are real; you must reconsider the problem.

When using the calculator, set n to the desired root index. The default n=4 gives the fourth root. For square roots, set n=2; for cube roots, n=3. The formula works for any positive integer n.

Limits of the Formula

The formula assumes n is a positive integer. For non-integer n, the concept of “n-th root” becomes multi-valued and requires branch cuts; the calculator does not handle that. Also, the formula gives the roots in rectangular form (a+bi). If you need polar form, convert each root to (rroot, angle_k) where angle_k = (θ + 2πk)/n.

The calculator uses double-precision floating point, so results may have tiny rounding errors (around 10⁻¹⁵). For most purposes, four decimal places are enough. If you need exact symbolic values, you must use algebra, not floating-point arithmetic.

Finally, remember that the roots are only defined for non-zero complex numbers. If a=0 and b=0, the modulus r=0, and every root is 0. The calculator will output 0 for all coordinates, which is correct.

Frequently Asked Questions

What does “bl4” mean in this context?

“bl4” is shorthand for “branch level 4” or simply “the fourth branch” of the root function. Since the fourth root has four distinct values, each is often called a branch. The calculator labels them k=0,1,2,3, which correspond to the four branches.

Why are there four roots instead of just one?

Because the equation z⁴ = w is a degree-4 polynomial, it has exactly four solutions in the complex numbers. Each solution is a fourth root. The real-number fourth root (like √[4]{16}=2) is just one of them; the others involve imaginary parts.

How do I find the fourth root of a negative number?

Use the same formula. For example, -16 has modulus 16 and angle 180°. The fourth roots have modulus 2 and angles (180° + 360°k)/4 = 45°, 135°, 225°, 315° for k=0,1,2,3. So the roots are √2+i√2, -√2+i√2, -√2-i√2, √2-i√2.

Can the fourth root of a complex number be real?

Yes, if the original number is a positive real number, one of the roots will be real (the principal root). For example, the fourth root of 16 has roots 2, 2i, -2, -2i. Only 2 and -2 are real. For negative real numbers, none of the roots are real.

What is the difference between the principal root and the other roots?

The principal root is the one with k=0, which has the smallest non-negative angle. It is often used as the default in calculators and programming languages. The other roots are equally valid solutions but have different angles, spaced 360°/n apart.

How do I convert the roots to polar form?

Each root has the same radius r^(1/n) and an angle (θ + 2πk)/n. So the polar form is r^(1/n) · (cos(angle_k) + i·sin(angle_k)). The calculator gives rectangular coordinates, but you can compute the angle from them using atan2(imag, real).

Related

Formula used
in re | Real part a | - | 3 | -100000 | 100000
in im | Imaginary part b | - | 4 | -100000 | 100000
in n | Root index n | - | 4 | 1 | 12
out r | Radius of roots | - | (re^2 + im^2)^(0.5) | 4
out th | Angle θ (degrees) | ° | atan2(im, re) * 180 / pi | 2
out rroot | Root radius r^(1/n) | - | (re^2 + im^2)^(0.5)^(1/n) | 4
out a0 | Root k=0 real part | - | (re^2 + im^2)^(0.5)^(1/n) * cos((atan2(im, re) + 2 * pi * 0) / n) | 4
out b0 | Root k=0 imag part | - | (re^2 + im^2)^(0.5)^(1/n) * sin((atan2(im, re) + 2 * pi * 0) / n) | 4
out a1 | Root k=1 real part | - | (re^2 + im^2)^(0.5)^(1/n) * cos((atan2(im, re) + 2 * pi * 1) / n) | 4
out b1 | Root k=1 imag part | - | (re^2 + im^2)^(0.5)^(1/n) * sin((atan2(im, re) + 2 * pi * 1) / n) | 4
out a2 | Root k=2 real part | - | (re^2 + im^2)^(0.5)^(1/n) * cos((atan2(im, re) + 2 * pi * 2) / n) | 4
out b2 | Root k=2 imag part | - | (re^2 + im^2)^(0.5)^(1/n) * sin((atan2(im, re) + 2 * pi * 2) / n) | 4
out a3 | Root k=3 real part | - | (re^2 + im^2)^(0.5)^(1/n) * cos((atan2(im, re) + 2 * pi * 3) / n) | 4
out b3 | Root k=3 imag part | - | (re^2 + im^2)^(0.5)^(1/n) * sin((atan2(im, re) + 2 * pi * 3) / n) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More on this panel

The whole Numbers and Counting panel →